Re: Emotiva News
Verfasst: Mo 16. Sep 2013, 16:06
XPA-3 GEN 2 799,00$ , fehlt nur noch die XPA-1
http://shop.emotiva.com/collections/amp ... ucts/xpa-3
SPECIFICATIONS
Number of channels: 3
Power output (all channels driven):
330 watts RMS @ 4 ohm (<0.1% THD)
200 watts RMS @ 8 ohm (<0.1% THD)
Rated power bandwidth: 20 Hz to 20 kHz +/- .075 dB
Minimum Recommended Load: 4 Ohms
Broadband Frequency response: 10 Hz to 80 kHz, +0 -1dB
Amplifier gain: 29 dB
THD + noise: <0.05%
Signal to Noise Ratio, A-weighted:
1 watt: > 96 dB
Full power: > 118 dB
Damping Factor: > 500 into 8-ohm load
Input impedance:
unbalanced: 23.5 kohms
balanced: 33 kohms
Power supply: 850 VA toroidal transformer with 60,000uF storage capacitance
Input Sensitivity (for rated power; 8-ohm load): 1.1 V load
Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required
Trigger Output: 12 VDC; can drive any load up to 100 mA
Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz
http://shop.emotiva.com/collections/amp ... ucts/xpa-3
SPECIFICATIONS
Number of channels: 3
Power output (all channels driven):
330 watts RMS @ 4 ohm (<0.1% THD)
200 watts RMS @ 8 ohm (<0.1% THD)
Rated power bandwidth: 20 Hz to 20 kHz +/- .075 dB
Minimum Recommended Load: 4 Ohms
Broadband Frequency response: 10 Hz to 80 kHz, +0 -1dB
Amplifier gain: 29 dB
THD + noise: <0.05%
Signal to Noise Ratio, A-weighted:
1 watt: > 96 dB
Full power: > 118 dB
Damping Factor: > 500 into 8-ohm load
Input impedance:
unbalanced: 23.5 kohms
balanced: 33 kohms
Power supply: 850 VA toroidal transformer with 60,000uF storage capacitance
Input Sensitivity (for rated power; 8-ohm load): 1.1 V load
Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required
Trigger Output: 12 VDC; can drive any load up to 100 mA
Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz